37
Dimensions
| Hull type | Monohull |
| LOA | 36.67 ft (11.18 m) |
| LWL | 31.00 ft (9.45 m) |
| Beam | 11.50 ft (3.51 m) |
| Draft | 5.67 ft (1.73 m) |
| Displacement | 22,500 lbs (10,206 kg) |
| Ballast | 8,000 lbs (3,629 kg) |
| Sail area (total) | 861 sq ft (80.0 m²) |
| Rig type | cutter |
| Keel type | full_keel |
| Rudder type | Skeg-hung |
| Fuel capacity | 90 gal |
| Designer | Robert Perry |
Construction
Sources
Dimensions/displacement/sail area (cutter rig) per sailboatdata.com; over 588 hulls built by Ta Yang (Taiwan) since 1976, also offered as a ketch. Solid, heavy hand-laid fiberglass hull; resin type not explicitly stated in available sources. Uniquely for this model, masts were genuinely offered as buyer's choice of wood (spruce) or aluminum spars, keel- or deck-stepped -- real, documented variability rather than a single standard, so left not_specified rather than defaulting to aluminum. Builder (Ta Yang) closed in September 2020; exact end of this model's production run not confidently pinned down, left year_end null. Verified 2026-07-09. [Rudder/tankage/electrical update, 2026-07-16]: Rudder mounted on a substantial skeg for offshore protection/strength (construction material not independently confirmed). Fuel: standard 90gal black iron tank under the V-berth (some boats reported up to 100gal). Water capacity varies widely by individual boat/refit (roughly 90-150gal across sources) -- too inconsistent across hulls to record a single model figure, left null. No holding-tank or electrical-system data found.