Oceanis 46.1
Dimensions
| Hull type | Monohull |
| LOA | 47.92 ft (14.61 m) |
| LWL | 43.44 ft (13.24 m) |
| Beam | 14.76 ft (4.50 m) |
| Draft | 7.71 ft (2.35 m) |
| Displacement | 23,360 lbs (10,596 kg) |
| Ballast | 6,028 lbs (2,734 kg) |
| Sail area (main) | 620 sq ft (57.6 m²) |
| Sail area (total) | 920 sq ft (85.5 m²) |
| Rig type | sloop |
| Keel type | fin |
| Rudder type | Spade |
| Fuel capacity | 52.8 gal |
| Water capacity | 97.7 gal |
| Designer | Finot-Conq (naval architecture), Nauta Design (interior) |
Construction
Sources
Dimensions per Beneteau/GlobeSailor spec sheets; displacement is light-ship figure. Used the deep-draft cast-iron keel option (of three offered) as representative; ballast/draft vary by keel option (shoal and 'performance' lead-bulb variants also offered -- performance keel adds a bulb). Sail area: 920 sqft is the standard 100% (self-tacking jib + classic mainsail) figure; a larger optional 'classic main + full genoa' combination totals ~1,242 sqft but is not used here to stay consistent with the 100%-foretriangle convention. Hull explicitly 'molded in polyester' per sailboatdata; deck is injected fiberglass/foam sandwich. Standard mast is 66'8" aluminum; taller aluminum or carbon performance masts offered as options. Verified 2026-07-09. [Rudder/tankage/electrical update, 2026-07-16]: Twin rudders (spade-type, standard for this wide-transom hull form; construction material not independently confirmed). Fuel 200L/~52.8gal, water 370L/~97.7gal. No holding-tank or electrical-system data found.